Reid and Sigrist R.S.1

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
R.S.1 Snargasher
300px
Reid and Sigrist RS1 c. 1939
Role Trainer
Manufacturer Reid and Sigrist
Designer W/Cdr George Lowdell
First flight early 1939
Introduction 1939
Status Cancelled
Primary user Royal Air Force (intended)
Number built 1
Variants Reid and Sigrist R.S.3/4

The Reid and Sigrist R.S. 1 was a British twin-engined, three-seat advanced trainer developed in the Second World War.

File:RS1- Snargasher.jpg
The prototype R.S.1 in its original colour scheme, c. 1939
File:RSStargnasher.jpg
G-AEOD in May 1939

Design and development

Reid and Sigrist in Desford, Leicester, United Kingdom, were an important instrument manufacturer in the interwar era, specialising in aircraft applications leading to the forming of an aviation division in 1937 at New Malden, Surrey factory site. The first product was a unique twin-engined advanced trainer powered by a pair of de Havilland Gipsy Six II (205 hp, 152 kW) engines.[1] Although basically a conventional mid-wing "taildragger" design with mainly wooden construction (the tail surfaces were fabric covered), the fuselage/wing surfaces had plywood covering, and the cockpit featured a sliding canopy for the three-seat configuration, that was in vogue at the time for training.[2] An alternate light bomber configuration was also proposed with a pilot and radio operator/navigator in the front compartment and a rear-facing gunner position behind equipped with a single machine gun.[3]

Operational history

The prototype, registered as G-AEOD on 9 October 1936, had its first flight early in 1939 with Reid and Sigrist test pilot George E. Lowdell at the controls.[2] The R.S.1 named whimsically "Snargasher" by the factory workers during its construction (the name which was eventually formally adapted had no meaning other than as a "family joke") made its first public appearance at the Heathrow Garden Party of the Royal Aeronautical Society on 15 May 1939 with its Certificate of Airworthiness issued on 3 June 1939.[4]

Further development of the type was suspended as the company became a wartime engineering and production concern with Bolton-Paul Defiant and Hawker Hurricane assembly and repair contracts. The R.S.1 was used as a communications aircraft by Reid and Sigrist, retaining its civil registration but flying in green/brown camouflage until the sole prototype was broken up in 1944. By that point, a more definitive development had been started, the R.S.3 "Desford" which was intended for postwar use.[2]

Specifications (R.S.1)

Data from[citation needed]

General characteristics

  • Length: 25 ft 4 in (7.72 m)
  • Wingspan: 36 ft 4 in (11.07 m)
  • Height: 8 ft, 11 in ()
  • Wing area: 212 ft2 ()
  • Loaded weight: 4,900 lb (2,222 kg)
  • Powerplant: 2 × de Havilland Gipsy Six II Series II piston engine, 205 hp () each
  • Propellers: 2 propeller, 1 per engine

Performance

References

Notes

  1. Gunston 1996, p. 136.
  2. 2.0 2.1 2.2 Swanborough 1997, p. 80.
  3. Gunston 1996, p. 137.
  4. Gunston 1996, pp. 136–137.

Bibliography

  • Gunston, Bill. Back to the Drawing Board: Aircraft That Flew, but Never Took Off. London: Zenith Imprint, 1996. ISBN 0-7603-0316-9.
  • Swanborough, Gordon. British Aircraft at War, 1939–1945. East Sussex, UK: HPC Publishing, 1997. ISBN 0-9531421-0-8.

External links