Renault FT

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Renault FT
FT 17.jpg
FT with Girod turret at Royal Museum of the Armed Forces, Belgium.
Type Light tank
Place of origin France
Service history
In service 1917–1949
Used by <templatestyles src="Plainlist/styles.css"/>
Wars <templatestyles src="Plainlist/styles.css"/>
Production history
Designed 1916
Variants <templatestyles src="Plainlist/styles.css"/>
  • Char canon
  • Char mitrailleuse
  • FT 75 BS
  • Char signal
  • FT modifié 31
  • U.S. M1917
  • Russkiy Reno
Specifications
Weight 6.5 tonnes (6.4 long tons; 7.2 short tons)
Length 5.00 m (16 ft 5 in)
Width 1.74 m (5 ft 9 in)
Height 2.14 m (7 ft 0 in)
Crew 2 (commander, driver)

Armor 8 to 22 mm (0.31 to 0.87 in)
Main
armament
Puteaux SA 1918 37mm gun or 8mm Hotchkiss machine gun
Engine Renault 4-cyl, 4.5 litre, thermo-siphon water-cooled . Gasoline (petrol) pump. Engine oil pump . Zenith preset carburetor. Magneto ignition.
Power/weight 5 hp/tonne
Transmission sliding gear; four speeds forward, one in reverse. One main clutch plus two subsidiary clutches (one for each of the two tracks) used for steering the tank.
Suspension vertical springs
Fuel capacity 95 litres (about 8 hours)
Operational
range
60 km (37 mi)

The Renault FT, frequently referred to in post-World War I literature as the "FT-17" or "FT17", was a French light tank that was among the most revolutionary and influential tank designs in history. The FT was the first production tank to have its armament within a fully rotating turret.[note 1] The Renault FT's configuration – crew compartment at the front, engine compartment at the back, and main armament in a revolving turret – became and remains the standard tank layout. Over 3,000 Renault FT tanks were manufactured by French industry, most of them during the year 1918. Another 950 of an almost identical licensed copy of the FT (the M1917) were made in the United States, but not in time to enter combat. Armoured warfare historian Steven Zaloga has called the Renault FT "the world's first modern tank."[2]

Development

The FT was designed and produced by the Société des Automobiles Renault (Renault Automobile Company), one of France's major manufacturers of motor vehicles then and now.

It is thought possible that Louis Renault began working on the idea as early as 21 December 1915, after a visit from Colonel J.B.E. Estienne.[3][4] Estienne had drawn up plans for a tracked armoured vehicle based on the Holt caterpillar tractor, and, with permission from General Joffre, approached Renault as a possible manufacturer. Renault declined, saying that his company was operating at full capacity producing war materiel and that he had no experience of tracked vehicles. Estienne took his plans to the Schneider company, where they became France's first operational tank, the Schneider CA.

At a later, chance meeting with Renault on 16 July 1916, Estienne asked him to reconsider, which he did. The speed with which the project then progressed to the mock-up stage has led to the theory that Renault had been working on the idea for some time.

Louis Renault himself conceived the new tank's overall design and set its basic specifications. He imposed a realistic limit to the FT's projected weight which could not exceed 7 tons. Louis Renault was unconvinced that a sufficient power-to-weight ratio could be achieved with the production engines available at the time to give sufficient mobility to the heavy tank types requested by the military.[5] Renault's most talented industrial designer, Rodolphe Ernst-Metzmaier, generated the FT's detailed execution plans . Charles-Edmond Serre, a long time associate of Louis Renault, organized and supervised the new tank's mass production. The FT's tracks were kept automatically under tension to prevent derailments, while a rounded tail piece facilitated the crossing of trenches . Because the engine had been designed to function normally under any slant, very steep slopes could be negotiated by the Renault FT without loss of power. Effective internal ventilation was provided by the engine's radiator fan which drew its air through the front crew compartment of the tank and forced it out through the rear engine's compartment.

Renault's design was technically far more advanced than the other two French tanks at the time, namely the Schneider CA1 (1916) and the heavy Saint-Chamond (1917). Nevertheless Renault encountered some early difficulties in getting his proposal fully supported by the head of the French tank arm, Colonel (later General) Jean Baptiste Eugène Estienne. After the first British use of heavy tanks on 15 September 1916 during the Battle of the Somme, the French military still pondered whether a large number of light tanks would be preferable to a smaller number of superheavy tanks (the later Char 2C). However, on 27 November 1916, Estienne had sent to the French Commander in Chief a personal memorandum proposing the immediate adoption and mass manufacture of a light tank based on the specifications of the Renault prototype. After receiving two large government orders for the FT tank, one in April 1917 and the other in June 1917, Renault was at last able to proceed. However his design remained in competition with the superheavy Char 2C until the end of the war.

File:Whippet-tank-verdun.gif
Crew locations shown with panels open

The prototype was refined during the second half of 1917, but the Renault FT remained plagued by radiator fan belt problems throughout the war. Only 84 were produced in 1917 but 2,697 were delivered to the French army before the Armistice.

Manufacturers

About half of all FTs were manufactured in Renault's factory at Boulogne-Billancourt near Paris, with the remainder subcontracted to other concerns. Of the original order for 3,530, Renault accounted for 1,850 (52 per cent), Berliet 800 (23 per cent), SOMUA (a subsidiary of Schneider & Cie) 600 (17 per cent), and Delaunay-Belleville 280 (8 per cent). When the order was increased to 7,820 in 1918, production was distributed in roughly the same proportion. Louis Renault agreed to waive royalties for all French manufacturers of the FT.

Attempts to manufacture in USA

When the USA entered the War in April 1917, its army was short of heavy materiel, and had no tanks at all. Because of the wartime demands on French industry, it was decided that the quickest way to supply the American forces with sufficient armour was to manufacture the FT in the USA. A requirement of 4,400 of a modified version, the M1917, was decided on, with delivery expected to begin in April, 1918. By June 1918, US manufacturers had failed to produce any, and delivery dates were put back until September. France therefore agreed to lend 144 FTs, enough to equip 2 battalions. No M1917s reached the American Expeditionary Forces (AEF) until the War was over.

Turret

US Army operating FTs on the Western Front, 1918.

The first turret designed for the FT was a circular, cast steel version almost identical to that of the prototype. It was designed to carry a Hotchkiss 8mm machine gun. In April 1917 Estienne decided for tactical reasons that some vehicles should be capable of carrying a small cannon. The 37mm Puteaux gun was chosen, and attempts were made to produce a cast steel turret capable of accommodating it, but they were unsuccessful. The first 150 FTs were for training only, and made of non-hardened steel plus the first model of turret. Meanwhile, the Berliet Company had produced a new design, a polygonal turret of riveted plate, which was simpler to produce than the early cast steel turret. It was given the name "omnibus", since it could easily be adapted to mount either the Hotchkiss machine gun or the Puteaux 37mm with its telescopic sight. This turret was fitted to production models in large numbers. In 1918 Forges et aciéries Paul Girod produced a successful circular turret which was mostly cast with some rolled parts. The Girod turret was also an "omnibus" design. Girod supplied it to all the companies producing the FT, and in the later stages of the war it became more commonplace than the Berliet turret.[6] The turret sat on a circular ball-bearing race, and could easily be rotated by the gunner/commander or be locked in position with a handbrake.

Service history

File:Renault FT17 Brazilian Army 1930s.png
From 1919 to WWII, various armies worldwide used this small, but most efficient and revolutionary designed tank of WWI. Here a model used by the Brazilian army in the 1930s.

The Renault FT was widely used by French forces in 1918 and by the American Expeditionary Forces (AEF) in France in the later stages of World War I.

The battlefield debut of the Renault FT occurred on 31 May 1918 east of the Forest of Retz, near Chaudun, between Soissons and Villers-Cotterets, during the Second Battle of the Marne. This engagement, with 30 FTs, successfully broke up a German advance, but in the absence of infantry support, the vehicles later withdrew. From then on, gradually increasing numbers of FTs were deployed, together with smaller numbers of the older Schneider CA1 and Saint-Chamond tanks. As the war had become a war of movement during the summer of 1918, the lighter FTs were often transported on heavy trucks and special trailers rather than by rail on flat cars. Estienne had initially proposed to overwhelm the enemy defences using a "swarm" of light tanks, a tactic that was eventually successfully implemented. Beginning in late 1917, the Entente allies were attempting to outproduce the Central Powers in all respects, including artillery, tanks, and chemical weapons. Consequently a goal was set of manufacturing 12,260 Renault FT tanks (including 4,440 of the US version) before the end of 1919.

After the end of World War I, Renault FTs were exported to many countries (Belgium, Brazil, Czechoslovakia, Estonia, Finland, Iran, Japan, Lithuania, Netherlands, Poland, Romania, Spain, Switzerland, Turkey, and Yugoslavia). Renault FT tanks were used by most nations having armoured forces, generally as their prominent tank type. The tanks were used in many later conflicts, such as the Russian Civil War, Polish-Soviet War, Chinese Civil War, Rif War, Spanish Civil War, and Estonian War of Independence.

Renault FT tanks were also fielded in limited numbers during World War II, in Poland, Finland, France, and the Kingdom of Yugoslavia, although they were already obsolete. In 1940 the French Army still had eight battalions equipped with 63 FTs each and three independent companies with ten each, for a total organic strength of 534, all equipped with machine guns. These were put to use after most of the modern equipment was lost in earlier battles.

Many smaller units assembled after the start of World War II also used the Renault FT. This usage gave rise to the popular myth that the French had no modern equipment at all; in fact, they had more modern tanks than the Germans.[7] The French suffered from tactical and strategic weaknesses rather than from equipment deficiencies. When the best French units were cut off by the German drive to the English Channel, the complete French materiel reserve was sent to the front as an expediency measure; this included 575 FTs. Earlier, 115 sections of FTs had been formed for airbase defence. The Wehrmacht captured 1,704 FTs. They used about a hundred for airfield defence and about 650 for patrolling occupied Europe. Some were used by the Germans in 1944 for street-fighting in Paris, but by this time they were hopelessly out of date. Vichy France used Renault FTs against Allied invasion forces during Operation Torch in Morocco and Algeria. The French tanks, however, were no match for the newly arrived American M4 Sherman and M3 Stuart tanks.[8]

Polish FT tanks during the Battle of Dyneburg

The FT was the ancestor of a long line of French tanks: the FT Kégresse, the NC1, the NC2, the Char D1, and the Char D2. The Italians produced the FIAT 3000, a moderately close copy of the FT, as their standard tank.

The Soviet Red Army captured fourteen burnt-out Renaults from White Russian forces and rebuilt them at the Krasnoye Sormovo Factory in 1920. Nearly fifteen exact copies, called "Russki Renoe", were produced in 1920–1922, but they never used in battle because of many technical problems. In 1928–1931 the first completely Soviet-designed tank was the T-18, a derivative of the Renault with sprung suspension.

Chinese FT

In all, the Renault FT was used by Afghanistan, Belgium, Brazil, the Republic of China, Czechoslovakia, Estonia, Finland, France, Nazi Germany, Iran, Japan, Lithuania, the Netherlands, Philippine Commonwealth, Poland, Romania, the Russian White movement, the Soviet Union, Spain, Sweden, Switzerland, Turkey, the United Kingdom, the United States and the Kingdom of Yugoslavia.

Nomenclature

Much confusion surrounds the name of this tank.

It is sometimes stated that the letters FT stand for the French terms faible tonnage (low tonnage), faible taille (small size), franchisseur de tranchées (trench crosser), or force terrestre (land force). None is correct. Nor was it named the FT 17 or FT-17; nor was there an FT18.

All new Renault projects were given a two-letter product code for internal use, and the next one available was 'FT.'

The prototype was at first referred to as the automitrailleuse à chenilles Renault FT modèle 1917. Automitrailleuse à chenilles means "armoured car with tracks." By this stage of the War, automitrailleuse was the standard word for an armoured car, but by the time the FT was designed there were two other types of French tank in existence and the term char d'assaut (from the French char - a cart or wagon, and assaut; attack or assault), soon shortened to char, had at the insistence of Colonel Estienne, already been adopted by the French and was in common use. Once orders for the vehicle had been secured it was the practice at Renault to refer to it as the "FT." The vehicle was originally intended to carry a machine-gun, and was therefore described as a char mitrailleur. Mitrailleur (from mitraille; grapeshot) had by this time come to mean "machine-gunner."

Many sources, predominantly English language accounts, refer to the FT as the "FT 17" or "FT-17." This term is not contemporary, and appears to have arisen post World War One. In Estienne's biography,[9] his granddaughter states, "It is also referred to as the FT 17: the number 17 was added after the war in history books, since it was always referred to at Renault as the FT." Lieutenant-Colonel Paul Malmassari (French tank officer and Doctor of History) states, "The Renault tank never carried the name FT 17 during the First World War, although the initials F.T. seem to appear in August 1917."[10] Some confusion might also have been caused by the fact that the American version of the vehicle, produced in the USA under licence from Renault, was designated the M1917.

When it was decided to equip the FTs with either cannon or machine-guns, the cannon version was designated char canon (cannon tank) and the latter, in accordance with French grammar, renamed char mitrailleuse (machine-gun tank).

It is frequently claimed that some of these tanks were designated FT 18. Reasons given for the claim include: it distinguished tanks produced in 1918 from those of 1917; it was applied to FTs armed with cannon as opposed to those with machine-guns; it distinguished FTs with a cast, rounded turret from those with a hexagonal one; it referred to the 18 horsepower engine; it indicated a version to which various modifications had been made.

However, Renault records make no distinction between 1917 and 1918 output; the decision to arm FTs with a 37mm gun was made in April, 1917, before any tanks had been manufactured; because of various production difficulties and design requirements, a range of types of turret were produced by several manufacturers, but they were all fitted to the basic FT body without any distinguishing reference; all FTs had the same model 18 hp engine. The Renault manual of April, 1918 is entitled RENAULT CHAR D'ASSAUT 18 HP, and the illustrations are of the machine-gun version. The official designation was not changed until the 1930s, when the FT was fitted with a Model 1931 machine-gun and renamed the FT31. By this time the French Army was equipped with several other Renault models and it had become necessary to distinguish between the various types.[11][12][13][14][15]

Variants

FT Char Mitrailleuse layout (with first-pattern turret)
Monument to first Soviet tank in Nizhny Novgorod, a copy of "Russky Reno"
  • Char canon: an FT with a 37 mm Puteaux SA18 short-barreled gun – about 3/5 of tanks ordered, about 1/3 of tanks actually produced
  • Char mitrailleuse: an FT with an 8 mm Hotchkiss M1914 machine gun – about 2/5 of tanks ordered, about 3/5 of tanks produced
  • FT 75 BS: a self propelled gun with a short barreled Blockhaus Schneider 75mm gun – at least 39 tanks were produced
  • Char signal or TSF: a command tank with a radio. "TSF" stands for télégraphie sans fil ("wireless"). No armament, three-men crew, 300 ordered, at least 188 produced
  • FT modifié 31: upgraded tanks with 7.5 mm Reibel machine gun. This modification started in 1931 on the 1580 chars mitrailleurs still in French stocks; all the metropolitan guntanks were (at least officially) scrapped to build utility vehicles on their chassis and the guns used to equip the R 35. This version was sometimes referred to as the "FT 31", though this was not the official name.
  • FT-Ko: Thirteen modified units imported by the Imperial Japanese Army in 1919, armed with either the 37 mm Puteaux SA18 cannon or machine guns; used in combat in the Manchurian Incident and subsequently for training[16]
  • M1917 – US-built copy. 950 built, 374 of which were gun tanks and fifty of which were radio tanks. During World War II the Canadian Army purchased 236 redundant M1917s for training purposes.
  • Russkiy Reno: the "Russian Renault", the first Soviet tank, produced at Krasnoye Sormovo. A close copy. 17 units were produced. Also known as "Tank M".
A Yugoslavian M26/27 tank destroyed in the 1941 invasion of Yugoslavia
  • Renault FT CWS: the Renault FT CWS or Zelazny ("mild steel") tanks were built in Poland for use as training vehicles only (Polish combat tanks were French manufactured). These tanks used spare French engines and components. The hulls and turrets were manufactured to French specifications in all other respects. Around 27 CWS FT tanks were built. CWS is the abbreviation for Centralne Warsztaty Samochodowe (translated as "Central Workshops for Motor vehicles" or "Central Truck Workshop"), a plant in Warsaw which performed maintenance and depot level repair.[17][18]
  • Renault M26/27: a development of the FT with a different suspension and Kégresse rubber tracks; a number were used in Yugoslavia and five in Poland.[19]
  • FIAT 3000 – an Italian derivation.
  • T-18 – A Soviet derivation from FIAT 3000 with sprung suspension.
  • Polish gas tank – A Polish modification built in the Wojskowy Instytut Gazowy ("Military Gas Institute") and tested on the Rembertów proving ground on 5 July 1926. Instead of a turret, the tank had twin gas cylinders. It was designed to create smoke screens, but could also be used for chemical attacks. Only one was produced.
  • Renault FT AC: A plan to convert France's obsolete FTs in to Tank Destroyers. The tank never left the drawing board.

Surviving vehicles

Approximately 41 FTs,[20] two Russkiy Renos, and three FT TSF survive in various museums around the world. (Twenty M1917s also survive.[21])

Europe:

  • Musée des Blindés, Saumur, France. The museum owns three FTs, with two in running order. The inoperable one came from Afghanistan, and is in a static display. Two other tanks from Afghanistan were given to the Patton Museum of Cavalry & Armor in Fort Knox, Kentucky.[22] Another one was given to Poland, where it has been renovated and is in running order. The Musée des Blindés also owns an FT TSF; it currently has no tracks and driving train, but the museum intends to restore it.
  • Musee de l'Armee, Paris, France. One FT
  • Glade of the Armistice, near Compiègne, France. One FT
  • Bovington Tank Museum, United Kingdom. One FT, an unarmoured training model.[23]
  • The Weald Foundation, U.K., has an FT and a TSF, both undergoing restoration.[24]
  • Royal Military Museum, Belgium. One FT is on permanent display.[25]
  • National Military Museum (Romania), Bucharest, Romania. An FT is on permanent outdoor display.[26]
  • Military Museum (Belgrade), Belgrade, Serbia. An FT is on permanent outdoor display.[27]
  • Parola Tank Museum, Parola, Finland. An FT is on display in the tank hall.[28]
  • Musée de l'armée Suisse, Burgdorf, Switzerland. An FT is displayed as the first tank of the Swiss Army, adopted in 1922.[29]
  • Museo de Medios Acorazados, El Goloso (Spain). An FT model 1917 under repair.[30]
  • Rogaland Krigshistoriske Museum, Stavanger, Norway () [31]
  • Two full-scale, working replicas of Renault FTs were built from scratch by an enthusiast for Jerzy Hoffman's Battle of Warsaw 1920 2011 film.

North America:

  • National Armor and Cavalry Museum, Fort Benning GA in the United States. In 2003, two FT tanks, one would have mounted a 37mm cannon and the other a 8mm mg, were discovered in Kabul by Major Robert Redding. With permission from the Afghan government, the two tanks were transferred to the United States, where one of them, a machine gun tank, was restored and originally put on display in the Patton Museum of Cavalry & Armor, until the Armor Branch collection was transferred to Fort Benning. This FT is currently on display in the Armor Gallery of the NIM. The NACM currently is restoring the other FT, 37mm gun tank. A previous FT at Fort Knox was transferred to U.S. Army Heritage & Education Center at Carlisle Barracks, PA.
  • Louisiana State Military Museum at Jackson Barracks, New Orleans, Louisiana. An FT was inundated by floodwaters of Hurricane Katrina in 2005. It is being restored and will be returned to display.
  • National World War I Museum, located at Liberty Memorial, Kansas City, Missouri. An FT, damaged by German artillery.[32]
  • An FT is on static display at the U.S. Army Heritage and Education Center in Carlisle, PA.
  • An FT is displayed in a life-sized diorama at Fort George G. Meade Museum, Maryland.

South America:

Australia:

See also

Notes

  1. Although a rotating turret had been a feature of some earlier tank designs or prototypes, and had been incorporated in armoured cars for several years, no tank with a turret had entered service.
Citations
  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Danjou, Pascal; Renault FT. Editions du Barbotin, 2009. p6.
  4. Jeudy, Jean-Gabriel; Chars de France. E.T.A.I., 1997 p36.
  5. Renault FT "Idea and concept" at Tank Encyclopedia
  6. Ibidem Zaloga, 2010, Chapter "The Light Tank Idea"
  7. J P Harris & F N Toase, Armoured Warfare, Basford 1990, p. 62
  8. Atkinson, Rick. An Army at Dawn: The War in North Africa, 1942–1943.
  9. Mondet, Arlette Estienne: Le général J.B.E. Estienne, père des chars. L'Harmattan, 2010
  10. Malmassari, P: Les chars de la Grande Guerre. Groupe Hommell, 2009.
  11. Jeudy, Jean-Gabriel; Chars de France. E.T.A.I., 1997.
  12. Zaloga, Steven J.; The Renault FT Light Tank. London, 1988.
  13. Danjou, Pascal; Renault FT. Editions du Barbotin, 2009.
  14. Ramspacher, Colonel E.G.; Le général Estienne. Lavauzelle, 1983.
  15. Ernst-Metzmaier, Rodolphe. Quelques souvenirs.
  16. Lua error in package.lua at line 80: module 'strict' not found.
  17. Lua error in package.lua at line 80: module 'strict' not found.
  18. Jan Tarczynski,Pojazdy w Wojsku Polskim: 1918–1939 (Polish Army vehicles), Oficyna Wydawnicza "Ajaks", 1995
  19. Janusz Magnuski (in Polish): Czołgi Renault w Wojsku Polskim – Część I – Renault FT (Renault tanks in the Polish Army – Part I) in: Nowa Technika Wojskowa Nr. 8/97
  20. 20.0 20.1 http://the.shadock.free.fr/Surviving_FT-17.pdf
  21. http://the.shadock.free.fr/Surviving_6ton_M1917.pdf
  22. Lua error in package.lua at line 80: module 'strict' not found.
  23. Lua error in package.lua at line 80: module 'strict' not found.
  24. https://www.wealdfoundation.org/Projects
  25. Lua error in package.lua at line 80: module 'strict' not found.
  26. Lua error in package.lua at line 80: module 'strict' not found.
  27. http://www.muzej.mod.gov.rs/muzej/galerija.html
  28. Lua error in package.lua at line 80: module 'strict' not found.
  29. Lua error in package.lua at line 80: module 'strict' not found.
  30. Lua error in package.lua at line 80: module 'strict' not found.
  31. Lua error in package.lua at line 80: module 'strict' not found.
  32. Lua error in package.lua at line 80: module 'strict' not found.
  33. Lua error in package.lua at line 80: module 'strict' not found.
  34. Lua error in package.lua at line 80: module 'strict' not found.

References

  • Canadian Renault 20 tanks
  • Canadian tanks
  • Canadian main battle tanks
  • Zaloga, Steven J., (2010) "French Tanks of World War 1", Osprey Publishing Ltd, London, ISBN 978-1-84603-513-5.
  • Zaloga, Steven J., (1988) "The Renault FT Light Tank", Osprey Publishing Ltd, London, ISBN 0-85045-852-8 .
  • Jurkiewiecz,Bruno, (2008) Les Chars Francais au Combat 1917–1918, (over 150 illustrations) ECPAD/YSEC, BP 405 27405 Louviers Cedex France. A compatible DVD of period films demonstrating the French WW I tanks, including the Renault FT, is attached to this book.
  • Gougaud, Alain, (1987) L'Aube de la Gloire: Les auto mitrailleuses et les chars francais pendant la Grande Guerre, Histoire technique et militaire, Societe Ocebur (Guides Muller), ISBN 2-904255-02-8.
  • Benedict Crowell, (1919) America's Munitions 1917-1918, Chapter 8 : Tanks, Washington Government Printing Office.
  • Colonel J.Perre, (1940) Batailles et Combats des Chars Francais: La bataille defensive Avril-Juillet 1918. Second Tome. Charles Lavauzelle & Cie.
  • Lieutenant-colonel Paul Malmassari (2009) Les Chars de la Grande Guerre. "14-18 Le Magazine de la Grande Guerre" . ISSN 1627-6612
  • Colonel Ortholan, Henri, ( 2008 ), La Guerre des Chars. Bernard Giovangeli Editeur, Paris, ISBN 978-2-909034-99-7
  • Estienne Mondet, Arlette, ( 2010 ), Le general J.B.E. Estienne . Pere des Chars , L'Harmattan, Paris, ISBN 978-2-296-13179-8
  • Hatry, Gilbert, ( 1978 ), Renault Usine de Guerre , Eds. Lafourcade, Paris, ISBN 2-902667-01-9-. A full chapter is dedicated to the industrial production history of the Renault FT
  • Renault Char d'Assaut 18 HP, Notice descriptive et Reglement de Manoeuvre et d'Entretien( Avril 1918 ). A.Omeyer, 26 Boulevard Beaumarchais, Paris 11eme. 68 pages and 15 plates. This is the original Renault factory complete user's manual for the "FT tank". It can be consulted on line at "scribd.com" (World Digital Library)
  • Dingli, Laurent ( 2000 ), Louis Renault , Grandes Biographies, Flammarion. ISBN 978-2-0806-7946-8
  • Leonard P.Ayres (1919), The War with Germany. A Statistical Summary, Washington, Government Printing Office. p. 80 (Tanks)

External links