20×110mm USN

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
20×110mm USN
Type Autocannon
Place of origin  USA
Service history
In service 1950s–present
Used by United States Navy Royal New Zealand Air Force
Wars Vietnam
Production history
Designer United States Navy
Specifications
Case type Rimless, bottleneck
Bullet diameter 19.9 mm (0.78 in)
Neck diameter 20.6 mm (0.81 in)
Base diameter 29 mm (1.1 in)
Rim diameter 29.5 mm (1.16 in)
Case length 109.5 mm (4.31 in)
Overall length 185 mm (7.3 in)
Primer type Electric
Maximum pressure 600 MPa (87,000 psi)

The 20×110mm USN (also known as 20×110mm US Navy and 20mm Mk-100 Series) was developed by the US Navy after WWII for use in Mk 11 and Mk 12 autocannon. They are called the Mk 100 series as they range from Mk 101 to Mk 109.

It has the same rim diameter as the 20×102mm but a different length and contour. It is not interchangeable with any other 20×110mm cartridge.[1]

Available loads

Some of the available loads for the 20×110mm USN are as follows:

Name Pressure (PSI) Projectile weight (grains) Projectile Type Muzzle Velocity (fps) Identification
Cartridge, 20mm, High Pressure Test, Mk 101 Mod 0 (USN) Not to exceed 72,500 1700 Inert Not listed Green or blue projectile with brown nose and 1/4 black letters reading "High Pressure Test Round"
Cartridge, 20mm, Low Pressure Test, Mk 102 Mod 0 (USN) Not listed 1700 Inert Not listed Green or blue projectile with brown nose and 1/4 black letters reading "Low Pressure Test Round"
Cartridge, 20mm, High Explosive Incendiary, Mk 105 Mod 0 (USN) Not to exceed 72,500 1700 Inert 3350 Green or blue projectile black lettering or blue projectile with brown nose and black lettering
Cartridge, 20mm, High Explosive Incendiary, Mk 106 Mod 0 & 1 (USN) 60000 1700 ±50 Impact detonating 3350 Unpainted fuze, red and yellow projectile
Cartridge, 20mm, Armor Piercing-Incendiary, Mk 107 Mod 0 (USN) 60000 1700 ±50 Armour Piercing Incendiary 3350 No fuze, Nose of projectile blue or brown with red band. Body of projectile black with white lettering.
Cartridge, 20mm, Armor Piercing-Tracer, Mk 108 Mod 0 (USN) 60000 1700 ±50 Armour Piercing Tracer 3350 No fuze. Hollow windshield. Brown or yellow nose, body of projectile black with white lettering.

There is also a Cartridge, 20mm, Dummy, Mk 103 Mod 0 (USN) which is an inert round. It has an empty primer pocket and holes in the case or a plugged primer pocket. It may be empty or filled with inert material. The projectile is usually brass or bronze plated.[2]

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.