Blu-Tack
Lua error in package.lua at line 80: module 'strict' not found.
Blu-tack is a reusable putty-like pressure-sensitive adhesive produced by Bostik, commonly used to attach lightweight objects (such as posters or sheets of paper) to walls or other dry surfaces. Traditionally blue, it is also available in other colours. Generic versions of the product are also available from other manufacturers.
The composition of Blu-Tack is a manufacturing secret but is described as a synthetic rubber compound without hazardous properties under normal conditions. It can be swallowed without harm and is noncarcinogenic. It is non-soluble and is denser than water. The material is not flammable, but emits carbon dioxide and carbon monoxide when exposed to fire or high temperatures.[1]
History
In 1970, laboratory researcher Alan Holloway was working for sealant manufacturer Ralli Bondite of Waterlooville, England. Ralli Bondite was a wholly owned subsidiary of G & L Ralli Investment & Trustee Co. Ltd. Holloway inadvertently produced a product that was useless as a sealant, but pliable and semi-elastic.[citation needed] This novelty product was demonstrated by Ralli Bondite management to visiting executives from another sealant and adhesive manufacturer, as a means of wall mounting notices. There was no need for secrecy about the formula, as it was of no use for a gun-grade mastic, the main product of Ralli Bondite. Initially the potential of this material was not fully recognised, but later Bostik commenced research into the development of what they were eventually to launch as Blu-Tack. In its conceptual stage Blu-Tack was white, but consumer research showed fears that children may mistake it for chewing gum, and the product was coloured blue.[2]
In the United Kingdom in March 2008, 20,000 numbered packs of pink Blu-Tack were made available, to help raise money for Breast Cancer Campaign,[3] with 10 pence from each pack going to the charity. The formulation was slightly altered to retain complete consistency with its blue counterpart. Since then, many coloured variations have been made, including red and white, yellow and a green Halloween pack.
Similar products
Similar products of various colours are made by many manufacturers, including Faber-Castell's "Tack-it", Henkel's "Fun-Tak", UHU's "Poster Putty" and "Sticky Tack", Pritt's "Sticky Stuff" and Elmer's "Poster Tack".
Versions of the product are also sold under the generic names "adhesive putty" and "mounting putty". The generic trademark or common name for mounting putty varies by region. It is known as "Patafix" in France, Italy and Portugal (a phonetic abbreviation for pâte à fixer, "fastening dough" in French)[citation needed], Kennaratyggjó ("teacher's chewing gum") in Iceland, and Häftmassa ("attachment mass") or kludd in Sweden.
Uses
Like all poster putties, Blu-Tack provides an alternative to the artist's traditional kneaded eraser, having a superior grip and plasticity.[citation needed] Blu-Tack can be finely shaped and worked into even very small areas. Like kneaded erasers, it can be stretched and kneaded to freshen its working surfaces.[4]
Blu-Tack is also used for sculpture. In 2007 artist Elizabeth Thompson created a 200-kilogram sculpture of a house spider using Blu-Tack over a wire frame. It took around 4000 packs and was exhibited at London Zoo.[5] Other artists have created works from the material including stop-motion animation.[6]
Blu-Tack can be used as a damping agent for sound and vibration applications, due to its low amplitude response properties.[7]
See also
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ http://www.stereophile.com/content/sound-surprise-loudspeakerstand-interface
