Indian locomotive class XP

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Indian XP
Vulcan Foundry works photo of GIPR no. 3100.
Vulcan Foundry works photo of GIPR no. 3100.
Type and origin
Power type Steam
Builder Vulcan Foundry
Serial number 4694–4695
Build date 1937
Total produced 2
Specifications
Configuration 4-6-2
UIC class 2′C1′h4
Gauge 5 ft 6 in (1,676 mm)
Driver diameter 6 ft 2 in (1.880 m)
Axle load Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).
Adhesive weight 55.75 long tons (56.64 t; 62.44 short tons)
Loco weight 99 long tons (101 t; 111 short tons)
Tender weight 74 long tons (75 t; 83 short tons)
Fuel type Coal
Fuel capacity 13 long tons (13 t; 15 short tons)
Water cap 5,500 imp gal (25,000 L; 6,600 US gal)
Boiler pressure 210 psi (1.45 MPa)
Firegrate area 40 sq ft (3.7 m2)
Cylinders Two, outside
Cylinder size Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value).
Valve gear Caprotti
Performance figures
Tractive effort 33,055 lbf (147.04 kN)
Career
Operators
Number in class 2
Numbers
  • GIPR: 3100, 3101
  • IR: 22599, 22600
Disposition Both scrapped
[1][2][3][4][5]

The Indian locomotive class XP was a class of experimental 4-6-2 "Pacific" type steam locomotives used on broad gauge lines in India.[1][2][3]

The two members of the class were built by Vulcan Foundry in Newton-le-Willows, Lancashire, England, to an order placed by the Great Indian Peninsula Railway (GIPR) in 1935.[2]

Background

The class XP was intended to have the power of the class XC heavy passenger Pacific locomotives, but the operating area of the light axle load class XB Pacifics.[4]

The performance objectives set for the class XP were running mileages of 200,000 mi (320,000 km) between overhauls, and a monthly average mileage of 10,000 mi (16,000 km). Both of these objectives were very ambitious for the time.[4]

Design details

The basis for the class XP design was the boiler and firebox of the XB, with some modification to their details. The wheels and cylinders of the two classes had the same dimensions.[4]

The XP's boiler pressure was higher, and its tractive effort was greater, than those of both the XB and the XC.[4]

Both class XP locomotives were fitted with Caprotti valve gear, and roller bearings on all engine and tender wheels. The class leader's bearings were supplied by Timken, and its class mate's bearings were by Skefco.[4]

In 1946, when the Indian government ordered the 16 class WP prototypes, their design was based on that of the class XP.[4][6]

Service history

The class XP locomotives entered service with the GIPR in 1937, as nos. 3100 and 3101.[2][4]

The class leader was named King George, in honour of the then King-Emperor of India, and the other class XP engine was named Queen Elizabeth, after the then Queen-Empress.[1]

In November 1951, the GIPR was incorporated into the Central Railway zone of the Indian Railways. In the All-India renumbering of 1957, the two class XP locomotives were given the numbers 22599 and 22600, respectively.[2][4]

Both locomotives had been withdrawn from service by 1970.[3]

See also

References

Notes

  1. 1.0 1.1 1.2 Hughes 1990, p. 59.
  2. 2.0 2.1 2.2 2.3 2.4 Hughes 1996, p. 24.
  3. 3.0 3.1 3.2 Marshall 2009, p. 36.
  4. 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Hughes 1996, p. 12.

Bibliography

  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.
  • Lua error in package.lua at line 80: module 'strict' not found.

External links

Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons

  • Lua error in package.lua at line 80: module 'strict' not found. – features a works photo of a class XP locomotive